Skip to Content

DIY Animal Ear Headband – Plastic Canvas Blog Hop!

Sharing is caring!

 

DIY Animal Ear Headband - Swoodson Says

People seem to either love Twitter or think its popularity is ludicrous. I am on the love end of the spectrum, and it was a random tweet from Diane, @craftypod , that spurred my participation in this round of the Plastic Canvas Blog Hop. I’ll be honest, I didn’t even have a mental image of what plastic canvas was until I clicked over and looked at some of her past PC projects and hops.

 

DIY Interchangeable Animal Ear Headband - swoodson Says

I was immediately intrigued after I realized what plastic canvas actually was, because  the one and only way I’ve ever seen it used is a tissue box cover. You know the type, right?

Yikes. But I bought a piece (from Jo-Ann Fabrics, dirt cheap) and started brainstorming. It actually is a really neat medium! The more I think about it, the more ways it seems like it would come in handy for both needlework crafts and sewing projects.

My son isn’t old enough to engage in much imaginative play, but I am eagerly anticipating that stage! Dress-up accessories are so ridiculously overpriced in stores so I thought some interchangeable play ears might be a really fun thing to DIY. These could also be great for Halloween costumes.

Bear Fox & Bunny Plastic Canvas Animal Ears DIY - Swoodson Says

Here is the finished project! From the left, bear ears, fox ears, and bunny rabbit ears all modeled by my two fabulous nieces.

Want to make some for yourself? Here is a DIY tutorial for dress-up animal ears! They just slide right on to a headband and slide back off for storage or swapping.

Be sure to check out the other projects on the blog hop as they appear each day, at the bottom of this post!

Supplies:

  • Two sheets of soft plastic canvas, size 7 count (this means there are 7 squares per inch)
  • A darning/large eye needle
  • Yarn (the more polyester and the less wool the better – pulling through the plastic puts lots of wear and tear on the fibers). I used a fuzzy yarn for the inner ears.
  • Pen
  • Scissors
  • Plastic Canvas Animal Ears Printable Template 

 

Steps:

These pictures are for one bear ear, but you would follow the same steps for each set of ears!

1. Print the template and place it below the canvas, tracing around it. Cut it out and test the insert spot to make sure you can fit the tongue through (curl both edges in and shove!). I found that snipping 3 bars, to make 4 empty squares worked best. 4 bars made it too loose on my headband.

Plastic Canvas Animal Ears DIY - Swoodson Says

2.Use an overcast stitch to go around the entire outside, starting on the row directly above the opening for the tongue.Plastic Canvas Animal Ears DIY - Swoodson Says

3. Use a backstitch for two rows at the base of the ear, right above the opening.Plastic Canvas Animal Ears DIY - Swoodson Says

4. I’m not sure if this one has a name, but I extended the overcast stitch back around, going about 3 boxes in until it looked full. Don’t fret if it looks a little funky, the inside yarn will cover it!Plastic Canvas Animal Ears DIY - Swoodson Says

5.Using a contrasting yarn, take long stitches over the entire rows from edge to edge, filling in the entire inner ear.Plastic Canvas Animal Ears DIY - Swoodson Says

6.Repeat the same process with the outer ear yarn on the back. Alternatively, you could hot glue fabric or felt on the back. I threaded underneath the existing overcast stitches instead of going through the canvas to the other side.Plastic Canvas Animal Ears DIY - Swoodson Says

7. Test the tongue insertion with your headband – I left several rows of blank canvas at the bottom because it varies a bit depending on the headband width. Trim the excess at the bottom as  needed after trying it on.

And you’re done! My Mom declared the back of these to be “too messy” but it’s a matter of taste. You can tuck the tongue back up under the yarn, or let it sit.

Bear Fox & Bunny Plastic Canvas Animal Ears DIY - Swoodson Says

 If your hair isn’t baby fine and thin like mine, you won’t even be able to see the blank canvas at the bottom but you could color it or cover it with a finer gauge embroidery thread if desired.

Fox Ears Headband - Swoodson Says

So! Tell me, had you ever heard of plastic canvas before? Used it? Have plans to try it out? I’m envisioning a unicorn horn in our near future!

Sharing is caring!

This site uses Akismet to reduce spam. Learn how your comment data is processed.

lynda

Wednesday 16th of July 2014

19 years ago i made "bootie"shower favors for my first grandaighters baby shower.i did pinks and blues and filled with candy. now this year i have cut out hangers for american girls doll(no yarn on these).

Stephanie - Swoodson Says

Wednesday 16th of July 2014

Oh that is clever to use plastic canvas as doll hangers, I love that idea! Thanks for stopping by Lynda!

Jodi

Monday 21st of April 2014

These are too awesome.

Stephanie - Swoodson Says

Tuesday 22nd of April 2014

Thanks so much Jodi!

Ren

Saturday 19th of April 2014

What a great project! Thanks for joining us at Inspire Us Thursday!

Chelsea

Saturday 19th of April 2014

How fun is that! And a great project for the kids to do themselves! Great idea.

Sally

Thursday 17th of April 2014

So cute and a great idea - especially the way you've made them interchangeable too.

Stephanie - Swoodson Says

Thursday 17th of April 2014

Thanks so much Sally! I am brainstorming other animals to try :)

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Sharing is Caring

Help spread the word. You're awesome for doing it!